TITEBOND ROOF CEMENT SEALANT


Titebond Roof Cement is an all-weather, asphalt based patching compound specifically designed and formulated to repair cracks, seams, gaps and holes in roofing materials. This sealant is ideal for repair and new-construction roofing applications. Use Titebond Roof Cement to set flashings, drip edges and roofing material edges as we...

more

Features & Benefits

check_circle
Stops roof leaks
check_circle
Ideal for wet or dry conditions
check_circle
Resists cracking
check_circle
Will not run or bubble
check_circle
Excellent for repair or new construction

Application Guidelines

Application Temperature:
50°F to 120°F.
Service Temperature Range:
-40°F. to 120°F.
Method of Application:
Cartridge/caulking gun
Tooling Time:
For a 1/4" bead, approximately 10-20 minutes
Working Surfaces:
For best results, surfaces should be clean, dry and free from any material that may deter adhesion.
Curing Time:
Allow product to cure between 30 and 60 days prior to application of reflective coating.
Cleanup:
Clean tools and excess material with mineral spirits before it dries. Scrape dried excess. Follow solvent vendor’s precautions when using solvents.
Coverage:
Container 1/4" Bead 3/8" Bead 1/2" Bead
10.3 oz. Cartridge 32 FT. 14 FT. 8 FT.
29 oz. Cartridge 355 FT. 89 FT. 39 FT.
Limitations:
Titebond Roof Cement should be applied when surface temperatures are between 50° and 120°F. In colder weather (50°F and below) product should be stored inside between 70°F and 80°F for 24 hours prior to application. Allow product to cure between 30 and 60 days prior to application of reflective coating. Roof Cement should not be painted. Do not apply to plastic, EPDM, Hypalon or similar type of synthetic rubber roof systems. If there is a question on compatibility, test a small area first before application to entire surface area. DO NOT APPLY DIRECTLY TO HEAT /FLAMES. Do Not Thin. For questions, please call our Help Line at 1-800-347-458.

Physical Properties

Type
Asphalt
Reactive VOC
250 g/L
State
Medium-viscosity mastic
Weight Per Gallon
8.80 lbs.
Color
Black
Flashpoint
> 105°F.
Solids
77.5%
Freeze/thaw Stability
Will not freeze
Viscosity
150,000 cps
Storage Life
12 months in tightly closed containers at 75°F.

SPECIFICATIONS

  • FEDERAL SPECIFICATION SS-C-153C TYPE I
  • ASTM D3409 AND ASTM D6511
  • ASTM D4586 TYPE I, CLASS II
  • SCAQMD RULE #1168

Caution Statement

WARNING: COMBUSTIBLE LIQUID AND VAPOR. VAPORS HARMFUL. Contains mineral spirits and asphalt. Keep away from heat, sparks, flame and other combustible materials. Use only with positive cross ventilation. Maintain ventilation until solvent dissipates. Do not use in confined areas. Use this product only if adequate ventilation can be used and maintained. Avoid breathing vapors. High vapor concentrations are irritating to the nose, throat, and respiratory system. Prolonged or repeated overexposure to solvents in product can cause central nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. Causes eye and skin irritation. Harmful if swallowed. As when working with any solvent based material, appropriate personal protective equipment, including gloves, should be worn. FIRST AID: If dizziness or respiratory difficulty occurs, remove to fresh air. Seek medical attention if breathing difficulty continues. If swallowed, do not induce vomiting. Seek medical attention immediately. If eye contact occurs, flush eyes with water for 15 minutes and consult physician. For skin contact, wash with soap and water. Seek medical attention if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.