TITEBOND COVE BASE PLUS CONSTRUCTION ADHESIVE


Titebond Cove Base Plus Adhesive is a professional-strength adhesive formulated to provide a fast, strong grab that holds materials firmly in place and eliminates sagging. The advanced formula adheres rubber and vinyl cove base to common building materials and has the added ability to bond to painted and primed surfaces. This VOC-co...

more

Features & Benefits

check_circle
Recommended For: Commercial and residential installation of rubber, vinyl and carpet cove bases, as well as stair treads.
check_circle
Compatible Materials: Common wall surfaces including plaster, drywall, gypsum wallboard, plywood, hardboard paneling, tileboard, wood, painted and primed surfaces and concrete.
check_circle
PLUS Performance – Adheres to Painted and Primed Surfaces
check_circle
Interior Vinyl and Rubber
check_circle
Eliminates sagging
check_circle
Quick grab
check_circle
Excellent adhesion
check_circle
Cleans easily with water in wet state
check_circle
Bonds to all common wall surfaces
check_circle
Environmentally safe
check_circle
Minimal bracing needed
check_circle
Impact-resistant
check_circle
VOC-compliant

Application Guidelines

Application Temperature:
Over 40°F for adhesive and substrates
Service Temperature Range:
0°F to 120°F
Working Time:
5-10 minutes
Prep:
Surfaces must be clean and free of any material that may prevent adequate adhesion.
Application:
Cut tip on slant for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply continuous parallel beads on the back of the cove base approximately 1” to 1 ½” apart. Press cove base firmly and uniformly against the wall within 5-10 minutes of applying adhesive. Note: Irregular or curved wall surfaces may require bracing until the adhesive has set.
Cleanup:
Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vendor’s precautions.
Limitations:
Titebond Cove Base Plus Adhesive is not designed for continuous submersion. When applying over paint, wallpaper, ceramic tile or other non-porous materials, "roughing up" the area by sanding or scraping will increase bond strength. For best results, store adhesive above 40°F.

Physical Properties

Type
Polymer emulsion
State
Medium-viscosity mastic
Color
Beige
Solids
59%
Viscosity
80,000 cps
pH
7.0
Calculated VOC
< 50 g/L
Weight Per Gallon
11.2 lbs.
Flashpoint
> 200°F
Freeze / Thaw Stability
Stable
Storage Life
18 months in an unopened container

Coverage

Size1/8” Bead1/4" Bead3/8" Bead1/2" Bead
10 Oz. Cartridge*129 ft.30 ft.14 ft.8 ft.
28 Oz. Cartridge355 ft.86 ft.39 ft.21 ft.
*Approximately 15 linear feet of 4 inch cove base using a double ¼ inch bead or zigzag pattern
†Approximately 43 linear feet of 4 inch cove base using a double ¼ inch bead or zigzag pattern