TITEBOND TRANSLUCENT WOOD GLUE


Titebond Translucent Wood Glue is designed for general household and woodworking projects. It provides a virtually invisible glue line and bonds stronger than the wood. A strong tack and fast speed of set helps reduce clamp time. When dry, this wood glue is unaffected by finishes and sands easily. Also ideal for craft projects, Tit...

more

Features & Benefits

check_circle
Virtually invisible glue line
check_circle
Fast set - Strong bond
check_circle
Good heat-resistance
check_circle
Safe - no solvent vapors
check_circle
Water cleanup & non-toxic
check_circle
Versatile
check_circle
Sets faster than most other white glues

Application Guidelines

Application Temperature:
Above 50°F.
Open Assembly Time:
5 minutes (70°F./50%RH)
Total Assembly Time:
10-15 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 100-150 psi for soft woods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application:
Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond Translucent Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

Type
Polyvinyl acetate emulsion
Calculated VOC
10.7 g/L
State
Liquid
Weight Per Gallon
9.1 g/L
Color
White
Dried Film
Translucent
Flashpoint
> 200°F.
Solids
45%
Freeze/thaw Stability
Stable
Viscosity
8500 cps.
Chalk Temperature
To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
24 months in tightly closed containers at 75°F.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,550 psi 50%
150°F. Overnight 1,600 psi 15%


SPECIFICATIONS

  • CONFORMS TO ASTM D-4236