TITEBOND ALL WEATHER SUBFLOOR ADHESIVE


Titebond All Weather Subfloor Adhesive is the ideal choice for subfloor installations. It is designed for particleboard, OSB, engineered lumber and wet, frozen and treated lumber. It offers a strong initial tack, provides superior strength and remains permanently flexible. Titebond All Weather fills gaps and irregularities between ...

more

Features & Benefits

check_circle
Works extremely well in cooler temperatures
check_circle
Ideal for plywood, particleboard and OSB
check_circle
Ideal for wet, frozen and ACA & CCA treated lumber
check_circle
Fills irregularities between materials to provide a more solid backup surface
check_circle
Exceeds the requirements of CAN/CGSB-71.25M and CAN/CGSB-71.26M specifications

Application Guidelines

Application Temperature:
0°F. to 100°F.
Service Temperature Range:
-20°F. to 120°F.
Method of Application:
Cartridge/caulking gun
Working Surfaces:
Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply adhesive to each piece of furring, studs or floor joists to be covered. When bonding subfloors or wet, frozen and treated lumber, nail or screw each sheet as recommended by the American Plywood Association.
Working Time:
Approximately 10-20 minutes for a 1/4" bead
Cleanup:
Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10 oz. Cartridge 123 ft. 30 ft. 13 ft. 8 ft.
28 oz. Cartridge 343 ft. 86 ft. 38 ft. 21 ft.
Limitations:
Titebond All Weather Subfloor Adhesive is not designed for continuous submersion or for use on polystyrene foams. For polystyrene foam, tub surrounds and most other plastics, we recommend Titebond Interior/Exterior Construction Adhesive.

Physical Properties

Type
Synthetic elastomeric polymer
Calculated VOC
389 g/L
State
Medium-viscosity mastic
Weight Per Gallon
9.81 lbs.
Color
Light tan
Flashpoint
< 0°F.
Solids
67%
Freeze/thaw Stability
Will not freeze
Viscosity
130,000 cps
Storage Life
18 months in tightly closed containers at 75°F.

SPECIFICATIONS

  • EXCEEDS THE PERFORMANCE REQUIREMENTS OF THE APA'S AFG-01, ASTM D3498 AND ASTM C557 SPECIFICATIONS.

Caution Statement

DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains hexane and toluene. Keep away from heat, sparks and flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; call physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

WARNING: This product contains toluene, a chemical known to the State of California to cause birth defects or other reproductive harm.