TITEBOND GENUINE HIDE GLUE


Titebond Genuine Hide Glue is the first hide glue to be offered in a liquid, ready-to-use form. It requires no mixing, heating or stirring. Professional woodworkers use Titebond Genuine Hide Glue for its long assembly time, exceptional strength and unique crackling effect on wood. Titebond Genuine Hide Glue provides superior creep-r...

more

Features & Benefits

check_circle
Ready-to-use form
check_circle
Ideal for fine furniture repair
check_circle
Excellent sandability
check_circle
Excellent creep-resistance
check_circle
Can be used to create a "crackling effect" on wood
check_circle
Slow set allows precise assembly

Application Guidelines

Application Temperature:
Above 50°F.
Open Assembly Time:
10 minutes (70°F./50% RH)
Total Assembly Time:
20-30 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application:
Can be applied by roller or dip spreader, pressurized oil cans, plastic applicators, brush or stick.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond Genuine Hide Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. KEEP FROM FREEZING.

Physical Properties

Type
Natural protein emulsion
Calculated VOC
0 g/L
State
Liquid
Weight Per Gallon
9.6 lbs.
Color
Amber
Flashpoint
> 200°F.
Dried Film
Translucent
Freeze/thaw Stability
Stable
Solids
52%
Viscosity
4,000 cps
pH
6.5
Storage Life
24 months in tightly closed containers at 75°F.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,591 psi 72%
150°F. Overnight 3,207 psi 59%


SPECIFICATIONS

  • CONFORMS TO ASTM D-4236

Caution Statement

CAUTION: EYE IRRITANT. Contains ammonium rhodanate; dicyanodiamide. Contact with eye will cause irritation. Do not take internally. Not intended for use by children. If eye contact occurs, rinse with running water for at least 15 minutes. If ingested do not induce vomiting. Seek medical attention if eye irritation or gastric distress occurs. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.