TITEBOND INTERIOR/EXTERIOR CONSTRUCTION ADHESIVE


Titebond Interior/Exterior Construction Adhesive is a versatile adhesive ideal for wood, paneling, drywall, ceramic tile, metal, foamboard and tub surrounds. It is also effective for installing foam insulation and panels to most building materials. Titebond Interior/Exterior provides excellent water-resistance and works extremely w...

more

Features & Benefits

check_circle
Ideal for wood, paneling, foamboard, tub surrounds, metal and much more
check_circle
Highly water-resistant

Application Guidelines

Application Temperature:
0°F. to 100°F.
Service Temperature Range:
-20°F. to 120°F.
Method of Application:
Cartridge/caulking gun
Working Surfaces:
Surfaces to be bonded should be clean, dry and free from any material that may deter adhesion. Apply adhesive to only one of the surfaces to be bonded. Apply mastic to panel perimeters and on 16-inch centers or a criss-cross pattern to ensure maximum adhesion. Temporary bracing or nailing may be needed to improve contact until adhesive dries. Allow to cure overnight for maximum strength.
Working Time:
Approximately 10-20 minutes for a 1/4" bead
Cleanup:
Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor ’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10 oz. Cartridge 123 ft. 30 ft. 13 ft. 8 ft.
28 oz. Cartridge 343 ft. 86 ft. 38 ft. 21 ft.
Limitations:
Titebond Interior/Exterior Construction Adhesive is not designed for continuous submersion. Do not apply to polystyrene foam if temperature is 90°F. or greater. Do not apply over wallpaper. Do not adhere one non-porous material to another since this will slow or prevent drying.

Physical Properties

Type
Synthetic elastomeric polymer
Calculated VOC
318 g/L
State
Medium-viscosity mastic
Weight Per Gallon
10.0 lbs.
Color
Tan
Flashpoint
< 0°F.
Solids
74%
Freeze/thaw Stability
Will not freeze
Viscosity
130,000 cps
Storage Life
18 months in tightly closed containers at 75°F.

SPECIFICATIONS

  • EXCEEDS THE REQUIREMENTS OF ASTM C557

Caution Statement

DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains hexane and isopropyl alcohol. Do not use near heat, sparks or flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; contact physician if discomfort persists. If swallowed, do not induce vomiting; contact physician immediately. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet.KEEP OUT OF THE REACH OF CHILDREN.

WARNING: This product contains small amounts of toluene, a chemical known to the State of California to cause birth defects or other reproductive harm.