WEATHERMASTER ULTIMATE MP SEALANT


Titebond® WeatherMaster™ ULTIMATE MP Sealant is specifically formulated to outperform all other sealant technologies, including VOC solvent, silicones, tripolymers, and urethanes. It offers unbeatable adhesion to aluminum, painted metal, PVC, concrete, wood, masonry, vinyl, glass, plastic, steel, asphalt roofing...

more

Watch Video

Features & Benefits

check_circle
Outperforms silicone, tripolymer and urethane sealants
check_circle
Applies easily in extreme weather conditions and provides a permanently flexible, weather-tight seal
check_circle
Excellent adhesion to most common building materials including Kynar™ and Hylar™ 5000 coated metals
check_circle
UV-resistant and VOC-compliant
check_circle
Compatible with all types of foam
check_circle
Approved for use on buildings in both Miami-Dade County and throughout the country

Application Guidelines

Application Temperature:
Above 0°F (-18°C)
Service Temperature Range:
-75°F to 300°F (-59°C to 149°C) white & colors, -40°F to 350°F (-40°C to 177°) translucent
Method of Application:
Cartridge/caulking gun, bulk/sausage gun
Tooling Time:
For a 1/4” bead, approximately 10-15 minutes, depending on temperature and humidity.
Working Surfaces:
Surfaces must be cleaned down to the original substrate and free from any material that may prevent adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. To ensure neat sealant lines, mask areas adjacent to joints.
Painting:
WeatherMaster ULTIMATE MP is intended for exterior use. If used indoors, sealant may need to be painted*. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints.
Cleanup:
Uncured material may be cleaned with isopropyl alcohol.† After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.

†Titebond WeatherMaster ULTIMATE MP Translucent (#71111) can be cleaned with mineral spirits or similar solvent before cured.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
Limitations:
Air, sealant and surface temperature should be above 0°F(-18°C).WeatherMaster ULTIMATE MP Sealant is intended for exterior use. If light colors are used indoors, sealant must be painted.* Painting may occur two hours after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is applied, do not wipe with solvents. Once sealant is dry to the touch and does not transfer, remove masking tape. If joint depth exceeds 1/2”, use backing material. Not designed for continuous submersion or use below the waterline. Store unused product in dry location below 75°F (24°C). Do not apply ULTIMATE MP Translucent to polycarbonate due to solvent cracking. For questions regarding use, please call our Help Line at 1-800-347-4583.

*Titebond WeatherMaster ULTIMATE MP Translucent (#71111) is not paintable

Physical Properties

Type
Advanced polymer
Reactive VOC - White and Colors
0 g/L (18.2 g/L [1.29% wt.] during cure)
Solids
99%
Reactive VOC - Transluscent
3 g/L (<0.3% wt.)
Weight Per Gallon
11.82 lbs. white & colors, 8.41 lbs. translucent
Viscosity
975,000 cps
Freeze/thaw Stability
Stable
Flashpoint
Solvent free/Not applicable
Storage Life
18 months in tightly closed containers below 75°F

SPECIFICATIONS

  • ASTM C920, TYPE S, GRADE NS, CLASS 50, USE T, M, A, G AND O
  • FEDERAL SPECIFICATION TT-S-00230C, TYPE II, CLASS A
  • AMA 808.3-92 (TRANSLUCENT)
  • USDA COMPLIANT
  • APPROVED FOR USE ON BUILDINGS IN BOTH MIAMI-DADE COUNTY AND THROUGHOUT THE COUNTRY**
**Neither Titebond WeatherMaster ULTIMATE MP Translucent

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. Product releases methanol‡ during cure. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

‡ Titebond WeatherMaster ULTIMATE MP Translucent (#71111) releases methyl ethyl ketoxime (MEKO) during cure.

Warranty Statement

Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Buyer’s sole remedy shall be limited only to the replacement of product exclusive of cost of labor. No other warranties are expressed or implied.