GREENCHOICE ADVANCED POLYMER PANEL ADHESIVE


Titebond GREENchoice Advanced Polymer Panel Adhesive is a high performance, professional strength advanced polymer adhesive specifically formulated to be used for most types of paneling installations. It has fast grab, a rapid cure rate, trowels easily, is moisture, mold and mildew resistant, and contains no water. GREENchoice Advan...

more

Features & Benefits

check_circle
Environmentally safe - VOC-compliant
check_circle
Fast strength development
check_circle
Nonflammable - No offensive odor
check_circle
Ideal for FRP, laminate & more
check_circle
Bonds non-porous surfaces
check_circle
Moisture, mold & mildew resistant
check_circle
Achieves NFPA Class A fire rating

Application Guidelines

Application Temperature:
Over 50°F and below 90°F for adhesive and substrates.
Service Temperature Range:
-40°F. to 220°F.
Method of Application:
V-notch trowel 3/16" wide x 1/4" deep, spaced 11/16" c.c.
Working Time:
20 minutes at 70°F.
Working Surfaces:
Surfaces must be free of any material that may deter adhesion, including severe and thick amounts of drywall joint compound. Patch large holes and depressions and remove any bumps, high spots, dust, oil, and grease. Cut and pre-fit all panels. Lay panels flat and let them acclimate to room temperature 24 hours before installing. Note: Bracing may be required if walls or panels are not straight. Panels used in conjunction with channel moldings should NOT fit tightly into the moldings. Leave a small gap under the molding for expansion and follow panel manufacturer’s recommendations. Any holes drilled through the panels for fasteners, pipes or conduits should be over-sized to allow for natural movement of the panel.

Click to download a PDF of our FRP Installation Guide.
Cleanup:
It is important to clean-up adhesive immediately while still wet. To clean adhesive from panel, tools and hands while wet, use mineral spirits and a rag. Once adhesive has cured, it can be extremely difficult to remove. Follow solvent vendor’s precautions. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.
Limitations:
For best results, store GREENchoice Advanced Polymer Panel Adhesive above 50°F. Before installation it is important to wipe down all metals with acetone if an oily residue is present as this can deter adhesion. When bonding two non-porous substrates together, particularly in low humidity climates, it is recommended to lightly mist the wall substrate with water just before applying panel. Panels that do not lay flat or are heavier in weight may require at least 24 hours of blocking and bracing or permanent mechanical fasteners. If applying adhesive over painted, plastered, or seal coated surfaces, please contact Titebond Help Line at 888-533-9043.

Physical Properties

Type
Polyether
Calculated VOC
0 g/L (20 g/L during cure)
State
Low viscosity mastic
Weight Per Gallon
11.2 lbs.
Color
Light tan
Flashpoint
> 200°F (Pensky-Martens Closed Cup)
Solids
100%
Freeze/thaw Stability
Not affected by freezing
Viscosity
125,000 cps
Storage Life
12 months in unopened container

TROWEL RECOMMENDATIONS AND COVERAGE

TROWEL SIZE TROWEL TYPE COVERAGE
3/16”W x 1/4”D x 11/16” C-C (OR 1/2” SPACE) V-NOTCH APPROXIMATELY 60 SQ. FT. PER GALLON
3/16”W x 1/4”D x 1/2” C-C (OR 5/16” SPACE) V-NOTCH APPROXIMATELY 50 SQ. FT. PER GALLON


SPECIFICATIONS

  • EXCEEDS THE PERFORMANCE REQUIREMENTS OF ASTM C557
  • MEETS THE REQUIREMENTS GREENSEAL GS-36, LEED, SCAQMD, CARB AND NAHB GREEN BUILDING SPECIFICATIONS

Caution Statement

WARNING: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye and skin contact persists, contact physician. Product releases methanol during cure. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.