WEATHERMASTER ULTIMATE MP TEXTURED SEALANT


Titebond® WeatherMaster™ ULTIMATE MP Textured Sealant is an elastic moisture curing sealant with a textured consistency perfect for use in most construction materials, including asphalt, stucco, concrete, mortar, wood, brick and stone. It will even adhere to challenging surfaces like Kynar 500® PVD and vehicles,...

more

Features & Benefits

check_circle
Ready to Use - No mixing or primer required; reduces labor and installation cost
check_circle
Ultra Low VOC - VOC-compliant in all 50 states
check_circle
Joint Movement Capability ± 35% - Remains permanently flexible
check_circle
Textured Look - Perfect for stucco, concrete, brick and more!
check_circle
Paintable - May be painted one hour after application
check_circle
Wide Temperature Application Range - Suitable for all climates
check_circle
Six textured colors perfect for stucco, concrete, brick and more

Application Guidelines

Application Temperature:
Above 0°F (-18°C)
Service Temperature Range:
-75°F to 300°F (-59°C to 149°C)
Method of Application:
Cartridge/caulking gun
Tooling Time:
For a 1/4” bead, approximately 10-15 minutes, depending on temperature and humidity.
Working Surfaces:
Surfaces must be cleaned down to the original substrate and free from any material that may prevent adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. To ensure neat sealant lines, mask areas adjacent to joints.
Painting:
WeatherMaster ULTIMATE MP is intended for exterior use. If used indoors, sealant may need to be painted. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints.
Cleanup:
Uncured material may be cleaned with isopropyl alcohol or acetone. After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
Limitations:
Air, sealant and surface temperature should be above 0°F(-18°C).WeatherMaster ULTIMATE MP Textured Sealant is intended for exterior use. If light colors are used indoors, sealant must be painted. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is applied, do not wipe with solvents. Once sealant is dry to the touch and does not transfer, remove masking tape. If joint depth exceeds 1/2”, use backing material. Not designed for continuous submersion or use below the waterline. Store unused product in dry location below 75°F (24°C). For questions regarding use, please call our Help Line 1-800-347-4583.

Physical Properties

Type
Advanced polymer
Reactive VOC
29.1 g/L
Solids
97.77%
Weight Per Gallon
10.9 lbs.
Viscosity
960,000 cps
Flashpoint
Solvent free/Not applicable
Storage Life
18 months in tightly closed containers below 75°F (24°C)

SPECIFICATIONS

  • ASTM C920, TYPE S, GRADE NS, CLASS 35, USE T, M, A, G AND O
  • FEDERAL SPECIFICATION TT-S-00230C, TYPE II, CLASS A
  • CORPS OF ENGINEERS CRD-C-541, TYPE II, CLASS A
  • CANADIAN STANDARDS BOARD CAN 19, 13-M82
  • AAMA 802.3-08 TYPE II, AAMA 803.3-08 TYPE I, AND AAMA 805.2-08 GROUP C

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. Product releases methanol during cure. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Warranty Statement

Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Buyer’s sole remedy shall be limited only to the replacement of product exclusive of cost of labor. No other warranties are expressed or implied.