TITEBOND FAST SET POLYURETHANE CONSTRUCTION ADHESIVE


Titebond® Fast Set Polyurethane Construction Adhesive is a one-component, advanced adhesive technology designed to build strength faster than other comparable products. It can be used for interior and exterior construction projects, and is the highest performing product of its kind, offering unmatched strength and dur...

more

Watch Video

Features & Benefits

check_circle
Faster set time and cure – develops strength quicker than common construction adhesives
check_circle
Permanently bonds most building materials
check_circle
Cold weather extrusion – extrudes down to 32°F
check_circle
Provides a smoother, more full-bodied adhesive bead that offers minimal shrinkage
check_circle
Environmentally safe - VOC-compliant
check_circle
Advanced urethane formula
check_circle
Ideal for use on wet, frozen, treated and engineered lumber
check_circle
Unmatched strength and durability
check_circle
Can be used to bond non-porous materials
check_circle
Works in near freezing temperatures
check_circle
Safe for plastic or foam
check_circle
Fast initial grab - Smooth bead - Fast cure - Minimal shrinkage
check_circle
Cartridge and carton contain post-consumer recycled material

Application Guidelines

Application Temperature:
32°F. to 120°F.
Service Temperature Range:
-20°F. to 120°F.
Method of Application:
Cartridge/caulking gun
Working Time:
Approximately 1 hour
Skin Time:
15-20 minutes at 50% relative humidity
Working Surfaces:
Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw each sheet as recommended by the American Plywood Association.
Cleanup:
Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10 oz. Cartridge 123 ft. 30 ft. 13 ft. 8 ft.
28 oz. Cartridge 343 ft. 86 ft. 38 ft. 21 ft.
Limitations:
Titebond Fast Set Polyurethane Construction Adhesive is not designed for continuous submersion. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. When using on non-porous substrates, mist with water to speed curing.

Physical Properties

Viscosity
150,000 cps.
Solids
98%
Open Time
15-20 minutes at 50% relative humidity
Flashpoint
> 200 °F
Freeze/thaw Stability
Will not freeze
Shrinkage
None
Weight Per Gallon
11.0 lbs.
Odor
Low
Calculated VOC
20 g/L
Shelf Life (Unopened)
18 months from the date of manufacture

SPECIFICATIONS

  • EXCEEDS THE REQUIREMENTS OF THE AMERICAN PLYWOOD ASSOCIATION'S AFG-01 SPECIFICATION, ASTM C557, ASTM D3498, CAN/CGSB-71.25M AND CAN/CGSB-71.26M

Caution Statement

WARNING: EYE AND SKIN IRRITANT. Potential skin and respiratory sensitizer. Contains isocyanates containing polymers. Avoid prolonged or repeated contact with skin or vapors. Do not allow eye contact. Use only with adequate ventilation. First Aid: If skin contact occurs, wash affected area with soap and water. If irritation persists or allergic reactions develop, contact physician. If adverse respiratory affects occur, remove individual to fresh air and contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. If swallowed, do not induce vomiting; contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.