- Environmentally safe - VOC-compliant
- Advanced urethane formula
- Ideal for use on wet, frozen, treated and engineered lumber
- Unmatched strength and durability
- Can be used to bond non-porous materials
- Works in near freezing temperatures
- Safe for plastic or foam
- Fast initial grab - Smooth bead - Fast cure - Minimal shrinkage
- Cartridge and carton contain post-consumer recycled material
Viscosity : 150,000 cps.
Solids : 98%
Open Time: 15-20 minutes at 50% relative humidity
Flashpoint : > 200 °F
Freeze/thaw Stability : Will not freeze
Weight Per Gallon : 11.0 lbs.
Calculated VOC: 20 g/L
Shelf Life (Unopened): 12 months from the date of manufacture
Coverage (maximum): Approximate length of bead according to bead diameter
|10 oz. Cartridge
|28 oz. Cartridge
32 °F. to 120 °F.
Service Temperature Range
-20°F. to 120°F.
Approximately 1 hour
Method of Application
15-20 minutes at 50% relative humidity
Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw each sheet as recommended by the American Plywood Association.
Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Titebond® Fast Set Polyurethane Construction Adhesive is not designed for continuous submersion. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. When using on non-porous substrates, mist with water to speed curing.
WARNING: EYE AND SKIN IRRITANT. Potential skin and respiratory sensitizer. Contains isocyanates containing polymers. Avoid prolonged or repeated contact with skin or vapors. Do not allow eye contact. Use only with adequate ventilation. First Aid: If skin contact occurs, wash affected area with soap and water. If irritation persists or allergic reactions develop, contact physician. If adverse respiratory affects occur, remove individual to fresh air and contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. If swallowed, do not induce vomiting; contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
|Part No.||Size||Weight(lbs.)||UPC||Case UPC||Units Per Package||Packages Per Pallet
|4221||10 Oz. Cartridge||15.32||037083042214||10037083042211||12||108
|4222||28 Oz. Cartridge||41.13||037083042221||10037083042228||12||44