- Ideal for paper and felt backed vinyl, vinyl composition and carpet tiles
- Quick grab - Strong bond
- Water-resistant - Freeze/thaw stable
- Environmentally safe - Nonflammable
Calculated VOC: 16.2 g/L
State : Low viscosity mastic
Weight Per Gallon : 9.2 lbs.
Color : Beige
Flashpoint : > 200°F.
Solids : 65%
Freeze/thaw Stability : Stable (5 cycles @20 °F.)
Viscosity : Roller, trowel, spray grade
Storage Life : 24 months in tightly closed containers at 75°F.
1/32" U-notch trowel- approximately 250 sq. ft. per gallon
1/16" square-notch trowel- approximately 150 sq. ft. per gallon
Spray, roller or brush- approximately 125-150 sq. ft. per gallon
*Refer to Application Guidelines for trowel recommendations.
Above 65°F. for adhesive and substrates
Service Temperature Range
40°F. to 120°F.
Method of Application
Airless mastic spray gun, roller, trowel or brush. For smooth surfaces, use a
1/32" U-notch trowel. For rough surfaces, use a 1/16" square-notch trowel.
72 hours maximum
Surface must be dry and free of any material that may deter adhesion. Cut and fit all material before applying adhesive. Apply adhesive. Adhesive is ready when it becomes nearly clear and no longer transfers to the finger when lightly touched. Set tiles in place carefully because they will not slide. Roll within 12 hours. Allow adhesive to dry well before exposing installations to
Clean tools and excess adhesive with water while wet. If adhesive has dried, use mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.
Do not use directly over or under solid vinyl tile or sheet goods. Remove old vinyl flooring before laying new floor. Keep from freezing. Subfloor and materials should be at least 65°F. for 24 hours before and after installation.
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye and skin contact areas persists, contact physician. For additional information, refer to Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.
|Part No.||Size||Weight(lbs.)||UPC||Case UPC||Units Per Package||Packages Per Pallet
|5124||4 Gallon Pail||39.59||037083051247|| ||1||36