Titebond 100% Silicone Sealant is a non-staining versatile formula designed for both interior and exterior applications. This strong, permanently flexible sealant will not shrink or discolor over time and provides excellent weather resistance. The mildew resistant formula will not crack or become brittle with age and resists fading or yellowing.

Features & Benefits

  • IDEAL FOR: General Construction, Remodeling, Repair Projects and Kitchen & Bath Applications.
  • SEALS: Vinyl, aluminum, glass, marble, granite, painted surfaces and most common building materials.
  • Premium multi-purpose applications
  • NSF 51 Certified for direct food contact
  • Non-staining versatile formula
  • Withstands extreme temperature changes
  • Will not crack or become brittle
  • No shrinkage or discoloration
  • Watertight seal


  • ASTM C920
  • Federal Specification TT-S-00230C
  • TT-S-001543A
When fully cured, meets FDA regulation 21-CFR-177.2600.

NSF 51 Certified for direct food contact.

Application Guidelines

  • Application Temperature: Above -40°F (-40°C)
  • Service Temperature Range: -60°F to 350°F (-51°C to 177°C)
  • Method of Application: Cartridge/caulking gun
  • Working Time: Approximately 15-20 minutes for a 1/4" bead
  • Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2" in width. 2. Remove nozzle, cut tip of the nub and puncture inner foil seal. 3. Screw nozzle onto cartridge and cut tip on slant for 1/4" to 3/8" bead and place in cartridge gun. 4. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
  • Cleanup: Clean uncured material with mineral spirits or equivalent solvent. After curing, excess sealant must be cut or scraped away. Follow solvent vendor's precautions when using solvents.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

Physical Properties

  • Type: Silicone
  • Calculated VOC: <50 g/L (3%)
  • Color: Clear, white and colors
  • Solids: 100%
  • Flashpoint: > 200°F
  • Viscosity: 250,000 cps
  • Freeze / Thaw Stability: Stable
  • Storage Life: 24 months in a dry location at or below 75°F


Not designed for continuous submersion or use below the waterline. Do not apply if rain is expected within 12 hours. This product should not be painted. Not recommended for alkaline substrates. For best results, store in a dry location at or below 75°F.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
26010370830260161003708302601310.1 Oz. Cartridge - White9.9912108
26110370830261151003708302611210.1 Oz. Cartridge - Clear9.9912108

Warranty Statement

50 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International